Real HD 48V 24W 0.5A PoE Injector Adapter Power Supply (10/100M)
Compact 48V PoE injector that adds power to a 10/100 Mbps Ethernet connection for compatible devices when a PoE switch is not available.
In stock
Questions about compatibility, installation, or choosing the right accessory? [Ask a CCTV Specialist]
Installer or Dealer? Request Trade Pricing.
Ships from Bensenville, IL
Fast Order Processing
1-Year Warranty
30-Day Return Window
This compact PoE injector adds power to a standard Ethernet connection when a PoE switch is not available, making it useful for compatible IP cameras, phones, and other supported network devices.
Power and 10/100 Mbps network data travel over the same Ethernet cable, helping simplify installations where the powered device is located away from a nearby electrical outlet. The plug-and-play design requires no injector-side software configuration.
Key Benefits
- Add PoE Without Replacing Your Switch – Adds power to an existing Ethernet connection for a compatible PoE device.
- Power and Data Over One Cable – Helps reduce separate cabling between the injector and connected device.
- Longer Device Placement – Supports documented cable runs up to 100 meters with suitable cabling and compatible equipment.
- Simple Plug-and-Play Setup – Requires no injector-side network configuration for normal installation.
Recommended Applications
- IP Security Cameras
- VoIP Phones
- Wireless Network Devices
- Small Surveillance Installations
- Single-Camera PoE Connections
- Locations Without a PoE Switch
| Network Interface | |
|---|---|
| LAN Input | 1 × RJ45 Ethernet port |
| PoE Output | 1 × RJ45 PoE Ethernet port |
| Network Speed | 10/100 Mbps |
| Power & PoE | |
|---|---|
| Output Voltage | 48 V DC |
| Output Current | Up to 0.5 A |
| Rated Power | 24 W |
| PoE Standard | IEEE 802.3af, as stated in the current product specifications |
| Electrical Protection | Short-circuit and overcurrent protection |
| Transmission | |
|---|---|
| Maximum Cable Distance | Up to 100 m (328 ft) |
| Supported Cabling | Cat5e or Cat6 |
| General | |
|---|---|
| Product Type | PoE Injector Adapter |
| Configuration | Plug and play; no injector-side software configuration required |
| Network Architecture | Layer 2 pass-through |
Find answers to common questions about compatibility, installation, supported equipment, product selection, and use with security camera and surveillance systems.
What is this 48V PoE injector used for?
It adds PoE power to a compatible Ethernet connection, allowing one supported network device to receive power and 10/100 Mbps data over the same Ethernet cable when a PoE switch is not available.
How many devices can this PoE injector power?
The injector provides one PoE output and is designed to power one compatible PoE device.
What network speed does the injector support?
The injector supports 10/100 Mbps Ethernet. It is not a Gigabit PoE injector.
How far can the injector transmit power and data?
The documented maximum cable distance is up to 100 meters or 328 feet when used with suitable Cat5e or Cat6 cable and compatible equipment.
Will this injector work with any PoE camera?
No. Confirm the connected device's PoE standard, voltage, power requirement, and network speed before installation. Compatibility should not be assumed based only on the RJ45 connector.